Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Can drbd-0.7.14 work with ocfs2 ?
/etc/init.d/o2cb start
Loading module "configfs": OK
Mounting configfs filesystem at /config: OK
Loading module "ocfs2_nodemanager": OK
Loading module "ocfs2_dlm": OK
Loading module "ocfs2_dlmfs": OK
Mounting ocfs2_dlmfs filesystem at /dlm: OK
Starting cluster ocfs2: OK
ha1:~ # /etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Not active
Because i can mount (no drbd)
mount -t ocfs2 /dev/sdc1 /data2 -> ok
umount /data2
but when i standup drbd
/etc/init.d/drbd start
drbdadm primary all
mount -t ocfs2 /dev/drbd0 /data2
ocfs2_hb_ctl: I/O error on channel while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation
not permitted"
resource oracle {
protocol C;
incon-degr-cmd "halt -f";
startup {
degr-wfc-timeout 120;
}
disk {
on-io-error detach;
}
net {
max-buffers 2048;
on-disconnect reconnect;
}
syncer {
rate 400M;
group 1;
}
on ha1 {
device /dev/drbd0;
disk /dev/sdc1;
address 192.168.2.6:7788;
meta-disk internal;
}
on ha2 {
device /dev/drbd0;
disk /dev/sdc1;
address 192.168.2.7:7788;
meta-disk internal;
}
}
--
Linux Certified
LPI
https://www1.lpi.org/en/verify.html?lpi_id=LPI000116649&ver_code=qsl9lrzeel
ou
http://www.lpi.org
LPIID = LPI000116649
VERCOD = qsl9lrzeel
"Se tu lutas, tu conquistas"