Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Am Donnerstag, 13. April 2006 16:53 schrieb Christopher Boumenot: > I am using DRBD in combination with Heartbeat, and I've noticed that on > occasion not all of the DRBD devices are properly configured. I've > tracked the issue down to DRBD and udev. When DRBD waits for udev to > register its devices it only waits for the very first device to be > registered. This is fine if you have one device, but if you have more > devices the scripts can incorrectly continue execution. As a result > Heartbeat's init script are executed, and when it attempts to mount a > DRBD backed partition it fails. > > After Hearbeat's init script has finished executing the cluster is in > the state Primary/Unknown (active), and Unknown/Secondary (standby), and > the DRBD's connection state is WFConnection. I've attached a patch that > addresses this issue by ensuring every device is configured before > continuing execution. > Applied to the 0.7-branch. -philipp -- : Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Schönbrunnerstr 244, 1120 Vienna, Austria http://www.linbit.com :