Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi,
Following http://wiki.linux-ha.org/DRBD_2fQuickStart07
# cat /proc/drbd
version: 0.7.10 (api:77/proto:74)
SVN Revision: 1743 build by root at castor, 2005-10-28 16:28:10
0: cs:WFConnection st:Secondary/Unknown ld:Inconsistent
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0
# drbdadm --do-what-I-say primary all
drbdadm: unrecognized option `--do-what-I-say'
What's the problem?
I use on Debian Sarge:
ii drbd0.7-module-source 0.7.10-3
ii drbd0.7-utils 0.7.10-3
ii drbdlinks 1.04-2
Kernel 2.6.14
# drbdsetup /dev/drbd0 show
Lower device: 08:17 (sdb1)
Meta device: internal
Disk options:
on-io-error = detach
Local address: 10.0.0.10:7788
Remote address: 10.0.0.13:7788
Wire protocol: C
Net options:
timeout = 6.0 sec (default)
connect-int = 10 sec (default)
ping-int = 10 sec (default)
max-epoch-size = 2048 (default)
max-buffers = 2048 (default)
sndbuf-size = 131070 (default)
ko-count = 0 (default)
Syncer options:
rate = 10240 KB/sec
group = 0 (default)
al-extents = 257
Also in "man drbdsetup", there is
drbdsetup {device} {disk} {lower_dev} {meta_data_dev} {meta_data_index}
[-d {size}] [-e {err_handler}]
What should be the value for {meta_data_dev} {meta_data_index} ?
Thanks,
Yann
--
Network & System Engineer
Goelaan SA, Switzerland
Tel. +41-22-960 98 20
Fax +41-22-960 98 21
http://www.goelaan.ch