Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
>
> Judging from people's posts and my own experience, I *think* that the
> problem does not show on SCSI, only on on-board SATA.
[...]
> Kernel 2.6.11.12 + bio_clone() fix, SMP
> Marvell MV88SX6081 8-port SATA II PCI-X Controller (rev 03),
> mvsata340 driver
> drbd 0.7.13 (SVN Revision: 1942)
> md3 : active raid5 sdf3[5] sde3[4] sdd3[3] sdc3[2] sdb3[1] sda3[0]
[...]
> on snfs1 {
> device /dev/drbd0;
> disk /dev/md3;
> address 10.0.0.2:7788;
> meta-disk internal;
> }
My config here is
2.6.13, SMP, 4CPUs
Currently the disk is on the compaq controller /dev/ida/c0d0...
No software raid.
I had no 24h of a wbtest on top of a Primary/SyncSource DRBD
with ext3 running. Nothing regarding ext3 in the syslog so far.
... I will rerun the test with on other IO configuration
-Phil
--
: Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 :
: LINBIT Information Technologies GmbH Fax +43-1-8178292-82 :
: Schönbrunnerstr 244, 1120 Vienna, Austria http://www.linbit.com :