Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
*********************** This mail has been scanned by InterScan MSS. ***********-*********** Hello everyone I am running DRBD 0.7.11 on top of LVM2, soon I found out that every time I execute some LVM2 commands, such as lvs, lvdisplay, pvscan, vgscan, the following error messeges will show up. I am wondering if there is any solution to solve this issue cheers David Huang -bash-3.00# pvscan /dev/drbd0: read failed after 0 of 4096 at 0: Input/output error /dev/drbd0: read failed after 0 of 4096 at 0: Input/output error /dev/drbd1: read failed after 0 of 4096 at 0: Input/output error /dev/drbd2: read failed after 0 of 4096 at 0: Input/output error /dev/drbd3: read failed after 0 of 4096 at 0: Input/output error /dev/drbd4: read failed after 0 of 4096 at 0: Input/output error /dev/drbd5: read failed after 0 of 4096 at 0: Input/output error /dev/drbd6: read failed after 0 of 4096 at 0: Input/output error /dev/drbd7: read failed after 0 of 4096 at 0: Input/output error /dev/drbd8: read failed after 0 of 4096 at 0: Input/output error /dev/drbd9: read failed after 0 of 4096 at 0: Input/output error /dev/drbd10: read failed after 0 of 4096 at 0: Input/output error PV /dev/sda2 VG VG01200508041602proNASVG lvm2 [18.56 GB / 16.31 GB free] PV /dev/sdb2 VG VG01200508041602proNASVG lvm2 [18.56 GB / 16.50 GB free] Total: 2 [37.12 GB] / in use: 2 [37.12 GB] / in no VG: 0 [0 ] -bash-3.00# vgscan Reading all physical volumes. This may take a while... /dev/drbd0: read failed after 0 of 4096 at 0: Input/output error /dev/drbd0: read failed after 0 of 4096 at 0: Input/output error /dev/drbd1: read failed after 0 of 4096 at 0: Input/output error /dev/drbd2: read failed after 0 of 4096 at 0: Input/output error /dev/drbd3: read failed after 0 of 4096 at 0: Input/output error /dev/drbd4: read failed after 0 of 4096 at 0: Input/output error /dev/drbd5: read failed after 0 of 4096 at 0: Input/output error /dev/drbd6: read failed after 0 of 4096 at 0: Input/output error /dev/drbd7: read failed after 0 of 4096 at 0: Input/output error /dev/drbd8: read failed after 0 of 4096 at 0: Input/output error /dev/drbd9: read failed after 0 of 4096 at 0: Input/output error /dev/drbd10: read failed after 0 of 4096 at 0: Input/output error Found volume group "VG01200508041602proNASVG" using metadata type lvm2