Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
> Hello, > > Hardware: Tyan Thunder i7501 Pro, 512MB RAM, Intel Xeon 2400, 3Ware > Escalade 7506-4P RAID Controller, 3x Seagate Baracuda 160GB (RAID 5), 2x > Intel Etherexpress 1000MBit (no Jumbo-Frames, MTU on default value) > > Software: Debian GNU/Linux Woody, Kernel 2.4.26, DRDB 0.7.3 > > Network link tested with iptraf. I sent a 190MB Package over the two > gigabit cards and measured a speed of 12MB/s. So I think the network cards > are alright. I tried with bonding mode 0 and 1. I can´t test it without > bonding, because the RAID on the second node rebuilds at the moment. If I would test the gigabit NICs of a pair of such servers I would not be satisfied with 12MB/sec. I would expect 120 mega byte per second. > > I dont tested the harddisks. > Have you got the 3ware software installed, do you know if the raid was just in the progress of rebuilding ? -Philipp -- : Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Schönbrunnerstr 244, 1120 Vienna, Austria http://www.linbit.com :