Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi, Yesterday I have tried to get DRBD 0.7.5 work on a RHEL 3 machine the system crashed while syncing, 30 seconds after starting it. What I have done now is to Compile DRBD 0.6.13 but this doesn't work also. Kernel is 2.4.21-15EL Compile when with out any problems, have use the described Red hat procedure to compile drbd . 1. go to /boot and cp config-2.4.xxxx /usr/src/linux-2.4/ 2. change to /usr/src/linux-2.4/ 3. make mrproper 4. vi Makefile and remove the custom text 5. make -s oldconfig_nonint 6. make dep 7. make modules 8. make modules_install 9. tar -xvzf drbd-0.6.13.tar.gz to /usr/src 10. change to /usr/src/drbd-0.6.13/ 11. vi drbd_config.h and edit the #define SIGHAND_HACK 12. change to /usr/src/drbd-0.6.13 13. make clean all 14. make 15. make install insmod drbd with out any problems. Here is the messages log Maschine #1 Nov 19 11:10:45 cluster01 drbd: ===> drbd start <=== Nov 19 11:10:45 cluster01 drbd: modprobe -s drbd minor_count=1 Nov 19 11:10:45 cluster01 kernel: drbd: initialised. Version: 0.6.13 (api:64/proto:62) Nov 19 11:10:45 cluster01 drbd: drbdsetup /dev/nb0 disk /dev/sda2 --do-panic Nov 19 11:10:45 cluster01 drbd: drbdsetup /dev/nb0 net 10.0.0.1:7788 10.0.0.2:7788 C --sync-rate=10M --tl-size=256 --timeout=60 --c onnect-int=10 --ping-int=10 Nov 19 11:10:46 cluster01 drbd: drbdsetup /dev/nb0 wait_connect -t 0 Nov 19 11:10:46 cluster01 kernel: drbd0: Connection established. size=417657870 KB / blksize=4096 B Nov 19 11:10:46 cluster01 kernel: klogd 1.4.1, ---------- state change ---------- Nov 19 11:10:46 cluster01 kernel: drbd0: FULL Synchronisation started blks=15 Nov 19 11:10:46 cluster01 drbd: 'drdb0' SyncingAll, but I have the good data. No need to wait. Nov 19 11:10:46 cluster01 drbd: WARNING: a cluster manager should not failover yet! Nov 19 11:10:50 cluster01 kernel: drbd0: [drbd_syncer_0/4690] sock_sendmsg timeout count down: ko=4294967295 Nov 19 11:15:03 cluster01 syslogd 1.4.1: restart. Maschine2 Nov 19 12:08:32 cluster02 drbd: ===> drbd start <=== Nov 19 12:08:32 cluster02 drbd: modprobe -s drbd minor_count=1 Nov 19 12:08:32 cluster02 kernel: drbd: initialised. Version: 0.6.13 (api:64/proto:62) Nov 19 12:08:32 cluster02 drbd: drbdsetup /dev/nb0 disk /dev/sda2 --do-panic Nov 19 12:08:32 cluster02 drbd: drbdsetup /dev/nb0 net 10.0.0.2:7788 10.0.0.1:7788 C --sync-rate=10M --tl-size=256 -- timeout=60 --connect-int=10 --ping-int=10 Nov 19 12:08:32 cluster02 drbd: drbdsetup /dev/nb0 wait_connect -t 0 Nov 19 12:08:39 cluster02 drbd: Operator forced primary status on drdb0 (/dev/nb0) Nov 19 12:08:39 cluster02 drbd: drbdsetup /dev/nb0 primary --human Nov 19 12:08:39 cluster02 drbd: ERROR: drbdsetup /dev/nb0 primary --human [21]: Nov 19 12:08:39 cluster02 drbd: ERROR: ioctl() failed: Input/output error Local replica is inconsistent (--do-what-I- say ?) Nov 19 12:08:45 cluster02 kernel: drbd0: Connection established. size=417657870 KB / blksize=4096 B Nov 19 12:08:45 cluster02 kernel: klogd 1.4.1, ---------- state change ---------- Nov 19 12:08:45 cluster02 kernel: drbd0: FULL Synchronisation started (target) Nov 19 12:12:36 cluster02 syslogd 1.4.1: restart. Hope someone can help me. Regards RobH