Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
I've cleaned up the conf file on both servers and I now have one as secondary and one as primary but they still don't connect. Here's the drbdsetup show info: Primary Node: -------------- Lower device: 58:00 (/dev/rendergroup/render) Disk options: disk-size = 1677721600 KB Local address: 10.0.0.2:7788 Remote address: 10.0.0.1:7788 Wire protocol: B Net options: timeout = 6.0 sec tl-size = 5000 connect-int = 10 sec ping-int = 10 sec sndbuf-size = 131070 sync-min = 10240 KB/sec sync-max = 11264 KB/sec sync-nice = -20 Secondary Node: ---------------- Lower device: 58:00 (/dev/rendergroup/render) Disk options: disk-size = 1677721600 KB Local address: 10.0.0.1:7788 Remote address: 10.0.0.2:7788 Wire protocol: B Net options: timeout = 6.0 sec tl-size = 5000 connect-int = 10 sec ping-int = 10 sec sndbuf-size = 131070 sync-min = 10240 KB/sec sync-max = 11264 KB/sec sync-nice = -20 Here's the cat: 0: cs:WFConnection st:Primary/Unknown ns:0 nr:0 dw:169210536 dr:50926812 pe:0 ua:0 0: cs:WFConnection st:Secondary/Unknown ns:0 nr:0 dw:0 dr:0 pe:0 ua:0 I tried to do: service drbd reconnect : on both but they still won't connect. I can ping the nodes. I'm not sure what the problem is... Cheers, Jason -----Original Message----- From: drbd-user-admin at lists.linbit.com [mailto:drbd-user-admin at lists.linbit.com]On Behalf Of Lars Ellenberg Sent: Wednesday, May 05, 2004 8:39 AM To: DRBD Subject: Re: [DRBD-user] Problems making connection On Tue, May 04, 2004 at 07:56:54PM -0700, Jason Gray wrote: > I've just setup a new cluster and I'm having problems getting the two > systems to talk. Here are the config files: > > When I try to start drbd on both systems they both start but cannot find > each other. I can ping the IP on both machines. I have a feeling it has > something to do with this: > > Node 1: > > 0: cs:WFConnection st:Primary/Unknown ns:0 nr:0 dw:1192 dr:133652 pe:0 ua:0 > > > Node 2: > > 0: cs:WFConnection st:Secondary/Unknown ns:0 nr:0 dw:0 dr:0 pe:0 ua:0 > 1: cs:Unconfigured st:Secondary/Unknown ns:0 nr:0 dw:0 dr:0 pe:0 ua:0 > > I can't seem to clear the Unconfigured resource from the module nor can I > get the Secondary to appear like this: > > 0: cs:WFConnection st:Unknown/Secondary ns:0 nr:0 dw:0 dr:0 pe:0 ua:0 > > Any thoughts on what I'm doing wrong? read the syslog. do drbdsetup /dev/nb0 show on both nodes. do a /etc/init.d/drbd restart on Node 2 lge _______________________________________________ drbd-user mailing list drbd-user at lists.linbit.com http://lists.linbit.com/mailman/listinfo/drbd-user