Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Version 0.6.12-5.deb ----snip---- root at via2:/etc# drbdsetup /dev/nb0 show Lower device: 22:01 (/dev/hdc1) Disk options: disk-size = 1945600 KB do-panic Local address: 10.0.10.11:7788 Remote address: 10.0.10.10:7788 Wire protocol: C Net options: timeout = 6.0 sec ko-count = 10 tl-size = 5000 connect-int = 10 sec ping-int = 10 sec sndbuf-size = 524288 sync-min = 500 KB/sec sync-max = 4096 KB/sec ----snip---- root at via2:/etc# cat /var/syslog | grep drbd Jun 10 01:05:38 via2 drbd: ===> drbd start <=== Jun 10 01:05:38 via2 drbd: modprobe -s drbd minor_count=5 Jun 10 01:05:38 via2 kernel: drbd: initialised. Version: 0.6.12 (api:64/proto:62) Jun 10 01:05:38 via2 drbd: drbdsetup /dev/nb0 disk /dev/hdc1 --do-panic --disk-size=1900M Jun 10 01:05:38 via2 drbd: drbdsetup /dev/nb0 net 10.0.10.11:7788 10.0.10.10:7788 C --sndbuf-size=512k --sync-nice=0 --sync-min=500k --sync-max=4M --tl-size=5000 --timeout=60 --connect-int=10 --ping-int=10 --ko-count=10 Jun 10 01:05:38 via2 drbd: drbdsetup /dev/nb0 wait_connect -t 60 Jun 10 01:05:46 via2 drbd: Operator forced primary status on drbd0 (/dev/nb0) Jun 10 01:05:46 via2 drbd: drbdsetup /dev/nb0 primary --human Jun 10 01:06:21 via2 kernel: drbd0: Connection established. size=1945600 KB / blksize=4096 B Jun 10 01:06:21 via2 kernel: drbd0: Synchronisation started blks=64 Jun 10 01:14:20 via2 kernel: drbd0: Synchronisation done. ----snip---- root at via2:/etc# cat /var/syslog | grep drbd Jun 10 01:06:21 via1 drbd: ===> drbd start <=== Jun 10 01:06:21 via1 drbd: modprobe -s drbd minor_count=5 Jun 10 01:06:21 via1 kernel: drbd: initialised. Version: 0.6.12 (api:64/proto:62) Jun 10 01:06:21 via1 drbd: drbdsetup /dev/nb0 disk /dev/hdc1 --do-panic --disk-size=1900M Jun 10 01:06:21 via1 drbd: drbdsetup /dev/nb0 net 10.0.10.10:7788 10.0.10.11:7788 C --sndbuf-size=512k --sync-nice=0 --sync-min=500k --sync-max=4M --tl-size=5000 --timeout=60 --connect-int=10 --ping-int=10 --ko-count=10 Jun 10 01:06:21 via1 drbd: drbdsetup /dev/nb0 wait_connect -t 60 Jun 10 01:06:21 via1 kernel: drbd0: Connection established. size=1945600 KB / blksize=4096 B Jun 10 01:06:22 via1 drbd: 'drbd0' SyncingAll, waiting for this to finish Jun 10 01:06:22 via1 drbd: drbdsetup /dev/nb0 wait_sync Jun 10 01:14:24 via1 drbd: 'drbd0' SyncingAll finished, issue drbdsetup /dev/nb0 secondary_remote ... and now both are Secondary ... root at via2:/etc# cat /proc/drbd version: 0.6.12 (api:64/proto:62) 0: cs:Connected st:Secondary/Secondary ns:1945600 nr:0 dw:0 dr:1945600 pe:0 ua:0 ... but why does it fall back from Primary to Secondary after syncing _all_? Helmut Wollmersdorfer