Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
hello, sorry I have an other question. I have 2 Nodes gamma1 192.168.1.6(primary) gamma2 192.168.1.7(secondary) and have on gamma1 a Raid1 System with md0,md1 and md2. I am using drbd 0.6.7 (will update to 11 next week) and heartbeat to start a simple apache. When I shut down gamma1, apache will start on gamma2, but the drbd0 (/dev/sda6) filesystem will not mount automatically, so apache uses the wrong Documentroot. Here my fstab (gamma2): /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> /dev/sda3 / ext3 errors=remount-ro 0 1 /dev/sda2 none swap sw 0 0 proc /proc proc defaults 0 0 /dev/fd0 /floppy auto user,noauto 0 0 /dev/cdrom /cdrom iso9660 ro,user,noauto 0 0 /dev/sda5 /tmp ext2 defaults 1 2 /dev/sda6 /var/www ext3 noauto 1 2 I added in haresources this line: gamma1 132.252.53.8 datadisk::drbd0 apache My ha.conf is ok. This is my drbd.conf: resource drbd0 { protocol=C fsckcmd=fsck.ext3 -p -y load-only net { sync-min = 50M sync-max = 90M tl-size = 5000 timeout = 60 connect-int = 10 ping-int = 10 } on gamma1 { device=/dev/nbd0 disk=/dev/md0 address=192.168.1.6 port=7789 } on gamma2 { device=/dev/nbd0 disk=/dev/sda6 address=192.168.1.7 port=7789 } } I hope, somone can help me. Thanks a lot. Thomas -- Thomas Kern E-mail: thomas at wi-inf.uni-essen.de ------------------------------------------------------------------- Wi.Informatik der Produktionsunternehmen | Tel.: +49 (0201) 1834059 Universitaet Duisburg-Essen | Fax.: +49 (0201) 1834067 Universitaetsstrasse 9, D-45143 Essen