Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
As always..too easy!
Now is there any way to have the Primary auto-connect every so often in
case the Secondary is rebooting?
Thanks Lars,
Mike
-----Original Message-----
From: drbd-user-admin at nudlaug.linbit.com
[mailto:drbd-user-admin at nudlaug.linbit.com] On Behalf Of Lars Ellenberg
Sent: Wednesday, February 11, 2004 4:06 PM
To: drbd-user at nudlaug.linbit.com
Subject: Re: [DRBD-user] Secondary node wants to take over as Primary on
reboot
/ 2004-02-11 14:30:45 -0700
\ Vera, Michael:
> drbdsetup /dev/nb0 show (bilbo2)
> Lower device: 104:03 (/dev/cciss/c0d0p3)
> Disk options:
> disk-size = 58788720 KB
> do-panic
> Local address: 10.0.0.2:7788
> Remote address: 10.0.0.1:7788
> Wire protocol: C
> Net options:
> timeout = 6.0 sec
> ko-count = 4
> tl-size = 5000
> connect-int = 10 sec
> ping-int = 10 sec
> sndbuf-size = 65534
> sync-min = 51200 KB/sec
> sync-max = 92160 KB/sec
> sync-nice = -10
>
> /proc/drbd (bilbo2)
> version: 0.6.10+cvs (api:64/proto:62)
>
> 0: cs:WFConnection st:Secondary/Unknown ns:0 nr:0 dw:0 dr:0 pe:0 ua:0
^^^^^^^^^^^^
>
>
>
> drbdsetup /dev/nb0 show (bilbo1)
> Lower device: 104:03 (/dev/cciss/c0d0p3)
> Disk options:
> disk-size = 58788720 KB
> do-panic
>
> ...No i didnt forget to paste a few more lines!! :0
>
>
> /proc/drbd (bilbo1)
> version: 0.6.10+cvs (api:64/proto:62)
>
> 0: cs:StandAlone st:Primary/Unknown ns:58788764 nr:0 dw:1214532
> dr:58795579 pe:0 ua:0
^^^^^^^^^^
so all you have to do is:
bilbo1# /etc/init.d/drbd drbd0 reconnect
Lars Ellenberg
_______________________________________________
drbd-user mailing list
drbd-user at lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user