Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Thanks for the help. Upon a closer look at my ha.cf file I discovered that when I changed from the ethernet driver (eth0) to the bonding driver (bond0), I forgot to update the ha.cf file and change "bcast eth0" to "bcast bond0". Once I did that, all the strange behaviors went away. Take care, Ward At 09:37 AM 2/5/2004 -0800, you wrote: >For what it's worth, I'm running DRBD with bonding a pair of copper >gig-e connections. I can get a full sync on a quiesced system (no NFS >traffic, etc.) in about 12 hours total. Failover in heartbeat works as >expected. > >I've not had any weirdness with heartbeat's behavior, but Phlipp >(ahem. :) ) is right -- What you're experiencing has nothing to do >with DRBD, you might want to poke around the heartbeat lists. > >You say failback doesn't work properly, do you maybe have >nice_failback set to on in your ha.cf? If you do, this is the behavior >you'd see; since that's what nice_failback does. :) > >Brian