[Drbd-dev] [PATCH 06/12] block: lift setting the readahead size into the block layer

Jan Kara jack at suse.cz
Thu Sep 17 12:35:40 CEST 2020


On Thu 10-09-20 16:48:26, Christoph Hellwig wrote:
> Drivers shouldn't really mess with the readahead size, as that is a VM
> concept.  Instead set it based on the optimal I/O size by lifting the
> algorithm from the md driver when registering the disk.  Also set
> bdi->io_pages there as well by applying the same scheme based on
> max_sectors.
> 
> Signed-off-by: Christoph Hellwig <hch at lst.de>
> ---
>  block/blk-settings.c         |  5 ++---
>  block/blk-sysfs.c            | 10 +++++++++-
>  block/genhd.c                |  5 +++--
>  drivers/block/aoe/aoeblk.c   |  2 --
>  drivers/block/drbd/drbd_nl.c | 12 +-----------
>  drivers/md/bcache/super.c    |  4 ----
>  drivers/md/dm-table.c        |  3 ---
>  drivers/md/raid0.c           | 16 ----------------
>  drivers/md/raid10.c          | 24 +-----------------------
>  drivers/md/raid5.c           | 13 +------------
>  10 files changed, 17 insertions(+), 77 deletions(-)
> 
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index 76a7e03bcd6cac..01049e9b998f1d 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -452,6 +452,8 @@ EXPORT_SYMBOL(blk_limits_io_opt);
>  void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
>  {
>  	blk_limits_io_opt(&q->limits, opt);
> +	q->backing_dev_info->ra_pages =
> +		max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES);
>  }
>  EXPORT_SYMBOL(blk_queue_io_opt);
>  
> @@ -628,9 +630,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
>  		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
>  		       top, bottom);
>  	}
> -
> -	t->backing_dev_info->io_pages =
> -		t->limits.max_sectors >> (PAGE_SHIFT - 9);
>  }
>  EXPORT_SYMBOL(disk_stack_limits);
>  
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 81722cdcf0cb21..95eb35324e1a61 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -245,7 +245,6 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
>  
>  	spin_lock_irq(&q->queue_lock);
>  	q->limits.max_sectors = max_sectors_kb << 1;
> -	q->backing_dev_info->io_pages = max_sectors_kb >> (PAGE_SHIFT - 10);
>  	spin_unlock_irq(&q->queue_lock);

So do I get it right that readahead won't now be limited if you store lower
value to max_sectors? Why? I'd consider io_pages a "cached value" of
max_sectors and thus expect it to change together with max_sectors...

> @@ -854,6 +853,15 @@ int blk_register_queue(struct gendisk *disk)
>  		percpu_ref_switch_to_percpu(&q->q_usage_counter);
>  	}
>  
> +	/*
> +	 * For read-ahead of large files to be effective, we need to read ahead
> +	 * at least twice the optimal I/O size.
> +	 */
> +	q->backing_dev_info->ra_pages =
> +		max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES);
> +	q->backing_dev_info->io_pages =
> +		queue_max_sectors(q) >> (PAGE_SHIFT - 9);
> +
>  	ret = blk_trace_init_sysfs(dev);
>  	if (ret)
>  		return ret;
> diff --git a/block/genhd.c b/block/genhd.c
> index 081f1039d9367f..db311a14ddc71a 100644
> --- a/block/genhd.c
> +++ b/block/genhd.c
> @@ -772,6 +772,7 @@ static void __device_add_disk(struct device *parent, struct gendisk *disk,
>  			      const struct attribute_group **groups,
>  			      bool register_queue)
>  {
> +	struct request_queue *q = disk->queue;
>  	dev_t devt;
>  	int retval;
>  
> @@ -782,7 +783,7 @@ static void __device_add_disk(struct device *parent, struct gendisk *disk,
>  	 * registration.
>  	 */
>  	if (register_queue)
> -		elevator_init_mq(disk->queue);
> +		elevator_init_mq(q);
>  
>  	/* minors == 0 indicates to use ext devt from part0 and should
>  	 * be accompanied with EXT_DEVT flag.  Make sure all
> @@ -812,7 +813,7 @@ static void __device_add_disk(struct device *parent, struct gendisk *disk,
>  		disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
>  		disk->flags |= GENHD_FL_NO_PART_SCAN;
>  	} else {
> -		struct backing_dev_info *bdi = disk->queue->backing_dev_info;
> +		struct backing_dev_info *bdi = q->backing_dev_info;
>  		struct device *dev = disk_to_dev(disk);
>  		int ret;

Not sure how/why these changes got here... Not that I care too much :)

>  
> diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
> index 5ca7216e9e01f3..89b33b402b4e52 100644
> --- a/drivers/block/aoe/aoeblk.c
> +++ b/drivers/block/aoe/aoeblk.c
> @@ -347,7 +347,6 @@ aoeblk_gdalloc(void *vp)
>  	mempool_t *mp;
>  	struct request_queue *q;
>  	struct blk_mq_tag_set *set;
> -	enum { KB = 1024, MB = KB * KB, READ_AHEAD = 2 * MB, };
>  	ulong flags;
>  	int late = 0;
>  	int err;
> @@ -407,7 +406,6 @@ aoeblk_gdalloc(void *vp)
>  	WARN_ON(d->gd);
>  	WARN_ON(d->flags & DEVFL_UP);
>  	blk_queue_max_hw_sectors(q, BLK_DEF_MAX_SECTORS);
> -	q->backing_dev_info->ra_pages = READ_AHEAD / PAGE_SIZE;
>  	d->bufpool = mp;
>  	d->blkq = gd->queue = q;
>  	q->queuedata = d;

Shouldn't AOE set 2MB optimal IO size so that readahead is equivalent to
previous behavior?

> diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
> index 1bbdc410ee3c51..ff2101d56cd7f1 100644
> --- a/drivers/md/bcache/super.c
> +++ b/drivers/md/bcache/super.c
> @@ -1427,10 +1427,6 @@ static int cached_dev_init(struct cached_dev *dc, unsigned int block_size)
>  	if (ret)
>  		return ret;
>  
> -	dc->disk.disk->queue->backing_dev_info->ra_pages =
> -		max(dc->disk.disk->queue->backing_dev_info->ra_pages,
> -		    q->backing_dev_info->ra_pages);
> -

So bcache is basically stacking readahead here on top of underlying cache
device. I don't see this being replicated by your patch so it is lost now?
Probably this should be replaced by properly inheriting optimal IO size?

								Honza
-- 
Jan Kara <jack at suse.com>
SUSE Labs, CR


More information about the drbd-dev mailing list