# Blueframe Settings Config Schema: v2
global {
  usage-count no;
  disable-ip-verification;
}

resource persist {
  options {
    cpu-mask                        ""; # default
    on-no-data-accessible           io-error; # default
    auto-promote                    yes; # default
    peer-ack-window                 4096s; # bytes, default
    peer-ack-delay                  100; # milliseconds, default
    twopc-timeout                   300; # 1/10 seconds, default
    twopc-retry-timeout             1; # 1/10 seconds, default
    auto-promote-timeout            20; # 1/10 seconds, default
    max-io-depth                    8000; # default
    quorum                          off; # default
    on-no-quorum                    suspend-io; # default
    quorum-minimum-redundancy       off; # default
  }
  device  /dev/drbd0;
  disk    /dev/strup-vg/strup-persist;

  disk {
    resync-rate                     409600k; # bytes/second
    on-io-error                     pass_on;
  }

  net {
    after-sb-1pri       discard-secondary;
    verify-alg          "md5";
  }

  meta-disk /dev/strup-vg/strup-metapersist;
  
  on TestVerify111-2 {
    node-id 2;
    address 172.20.0.2:7789;
  }
  
  on TestVerify111-3 {
    node-id 3;
    address 172.20.0.3:7789;
  }
  
  on TestVerify111-1 {
    node-id 1;
    address 172.20.0.1:7789;
  }
  
  connection-mesh {
    hosts TestVerify111-2 TestVerify111-3 TestVerify111-1;
  }
}