<div dir="ltr">Hi,<br><br>I'm fairly new to DRBD.<br><br>I already configures a DRBD pair which works prefectly!<br><br>I tried configuring the timeout value (in the net section of the drbd.conf file) and it seems like no matter what I do I get a timeout of approx 10 seconds.<br>
Am I doing something wrong (probably yes)?<br><br>Basically what I do is I write to the Primary and in the middle of the IO I pull the Ethernet cable from the Secondary. I use iostat to monitor the IO and I see that IO resumes (locally) after 10 seconds.<br>
Reconnecting the cable back to the Secondary initiates the synchronization (as expected)<br><br>Attached is my drbd.conf file.<br><br>Thanks<br><br>VJ<br><br>resource mydb {<br> protocol C;<br> syncer {rate 30M;}<br>
device /dev/drbd1;<br> disk /dev/drbd-dev/mydbdev;<br> meta-disk internal;<br> startup {degr-wfc-timeout 120;<br> wfc-timeout 0;}<br>
net {connect-int 10;<br> ping-int 10;<br> timeout 30;}<br> on SRVR1 {address <a href="http://172.16.1.1:7789">172.16.1.1:7789</a>;}<br> on SRVR2 {address <a href="http://172.16.1.2:7789">172.16.1.2:7789</a>;}<br>
}<br></div>