skip {
  As you can see, you can also comment chunks of text
  with a 'skip[optional nonsense]{ skipped text }' section.
  This comes in handy, if you just want to comment out
  some 'resource <some name> {...}' section:
  just precede it with 'skip'.

  The basic format of option assignment is
  <option name><linear whitespace><value>;
  
  It should be obvious from the examples below,
  but if you really care to know the details:
  
  <option name> :=
        valid options in the respective scope
  <value>  := <num>|<string>|<choice>|...
              depending on the set of allowed values
              for the respective option.
  <num>    := [0-9]+, sometimes with an optional suffix of K,M,G
  <string> := (<name>|\"([^\"\\\n]*|\\.)*\")+
  <name>   := [/_.A-Za-z0-9-]+
}


resource r0 {

  protocol B;
  incon-degr-cmd "echo '!DRBD! pri on incon-degr' | wall ; sleep 60 ; halt -f";

  startup {
    degr-wfc-timeout 120;    # 2 minutes.
  }

  disk {
#    on-io-error   detach;
    on-io-error   pass_on;
  }

#  syncer {
#    rate 10M;
#    group 1;
#    al-extents 257;
#  }

  on matisse.ujf-grenoble.fr {
    device     /dev/drbd0;
    disk       /dev/sda5;
    address    193.54.242.10:7788;
    meta-disk  internal;

  }

  on dionysos.ujf-grenoble.fr {
    device    /dev/drbd0;
    disk      /dev/sda5;
    address   193.54.242.22:7788;
    meta-disk internal;
  }
}