<table width=100% dir="ltr"><tr><td><DIV id=wrteplaceholder name="wrteplaceholder"> </DIV>
<DIV name="wrteplaceholder">I think the problem lies in the line:</DIV>
<DIV name="wrteplaceholder"> </DIV>
<DIV name="wrteplaceholder">Server52 10.0.0.50::datadisk::drbd0 Filesystem::/dev/nb0::smb</DIV>
<DIV name="wrteplaceholder"> </DIV>
<DIV name="wrteplaceholder">The 10.0.0.50 should be on its own. So, you should have:</DIV>
<DIV name="wrteplaceholder"> </DIV>
<DIV name="wrteplaceholder">Server52 10.0.0.50 datadisk::drbd0 Filesystem::/dev/nb0::smb</DIV>
<DIV name="wrteplaceholder"><BR>Now, the "::" separates a script (or a resource in heartbeat terms) from its argument. The 10.0.0.50 is a shortcut for </DIV>
<DIV name="wrteplaceholder">IPaddr::10.0.0.50. It tells heartbeat to assign the cluster IP address, 10.0.0.50 to the local node when it becomes primary.</DIV>
<DIV name="wrteplaceholder">It has nothing to do with drbd. datadisk::drbd0 on the other hand tells drbd to make the local drbd partition primary when</DIV>
<DIV name="wrteplaceholder">the heartbeat determines that the local node should be primary.</DIV>
<DIV name="wrteplaceholder"><BR><BR> </DIV>
<DIV name="wrteplaceholder">
<TABLE style="BORDER-RIGHT: 1px outset; BORDER-TOP: 1px outset; BORDER-LEFT: 1px outset; BORDER-BOTTOM: 1px outset" cellSpacing=0 cellPadding=0 width="100%" bgColor=#f0f0f0>
<TBODY>
<TR>
<TD><FONT size=2><B><michael.mueller@pergis.de></B><BR>[DRBD-user] problem with heartbaet</FONT></TD></TR></TBODY></TABLE></DIV>
<DIV name="wrteplaceholder"><PRE dir=ltr>Hello,
<BR>
<BR>i`ve a question about heartbeat together with drbd. I've installed a system
<BR>with two server
<BR>(called server51 and server52). They are both installed with suse 9.0
<BR>including the packages drbd and heartbeat. In both server are three network
<BR>cards installed.
<BR>Two of them are connected by an cross-over cable and each one goes to LAN.
<BR>The system
<BR>is going to be a fileserver in the LAN.
<BR>
<BR>First I've built an mirror with drbd. It is working fine ! Here is my
<BR>drbd.conf file:
<BR>#
<BR>resource drbd0 {
<BR> protocol = B
<BR> fsckcmd = fsck -p -y
<BR># disk {
<BR># do-panic
<BR># disk-size = 4194304k
<BR># }
<BR> net {
<BR> sync-min = 10M
<BR> sync-max = 50M # maximal average syncer bandwidth
<BR> sync-nice = 5
<BR> tl-size = 5000 # transfer log size, ensures strict write ordering
<BR> timeout = 60 # 0.1 seconds
<BR> connect-int = 10 # seconds
<BR> ping-int = 10 # seconds
<BR> }
<BR> on node1 {
<BR> device = /dev/nb0
<BR> disk = /dev/hda4
<BR> address = 192.168.0.51
<BR> port = 7788
<BR> }
<BR> on node2 {
<BR> device = /dev/nb0
<BR> disk = /dev/hda4
<BR> address = 192.168.0.52
<BR> port = 7788
<BR> }
<BR>
<BR>There are no problems with running drbd !
<BR>
<BR>Now I will configure heartbeat. But I've no idea where I've made a mistake.
<BR>
<BR>here are my config files:
<BR># /etc/ha.d/haresources
<BR>#
<BR>#
<BR>#
<BR>Server52 10.0.0.50::datadisk::drbd0 Filesystem::/dev/nb0::smb
<BR>
<BR># /etc/ha.d/ha.cf
<BR>#
<BR># server52
<BR>#
<BR>debugfile /var/log/ha-debug
<BR>logfile /var/log/ha-log
<BR>logfacility local0
<BR>deadtime 10
<BR># serial /dev/ttyS3
<BR>udp eth1
<BR>udp eth2
<BR>thost1 server51
<BR>thost2 server52
<BR>
<BR># /etc/ha.d/authkeys
<BR># 02.10.2001
<BR>#server52
<BR>#
<BR>auth 1
<BR>1 crc
<BR>
<BR>
<BR>
<BR>Perhaps somebody can help. Thank you
<BR>
<BR>Michael
<BR>
<BR>
<BR>_______________________________________________
<BR>drbd-user mailing list
<BR>drbd-user@lists.linbit.com
<BR><A href="http://lists.linbit.com/mailman/listinfo/drbd-user">http://lists.linbit.com/mailman/listinfo/drbd-user</A></PRE>
<HR noShade SIZE=1>
<BR><BR>
<HR SIZE=1>
</DIV></td></tr></table>
<br>
<hr size=1 noshade>
Walla! Mail, Get Your Private, Free E-mail from Walla! at:<br>
<a href="http://mail.walla.co.il">http://mail.walla.co.il</a><br>