[DRBD-user] r0 ok, r1 PingAck did not arrive in time

Gerald Brandt gbr at majentis.com
Wed Jun 26 13:20:21 CEST 2013

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


Sorry, that should have been Ubuntu 12.10

Gerald

----- Original Message -----
> From: "Gerald Brandt" <gbr at majentis.com>
> To: drbd-user at lists.linbit.com
> Sent: Wednesday, June 26, 2013 6:09:06 AM
> Subject: Re: [DRBD-user] r0 ok, r1 PingAck did not arrive in time
> 
> Hi,
> 
> I'm having the same issue with Ubuntu 12.04 LTS (kernel 3.5.0) and
> DRBD 8.3.13, and I'm thinking of adding a third DRBD resource to the
> same box.
> 
> Gerald
> 
> 
> ----- Original Message -----
> > From: "Lukas Gradl" <proxmox at ssn.at>
> > To: drbd-user at lists.linbit.com
> > Sent: Tuesday, June 25, 2013 3:31:51 PM
> > Subject: [DRBD-user] r0 ok, r1 PingAck did not arrive in time
> > 
> > Hi!
> > 
> > I've a two-node cluster with two identical configured ressources.
> > The
> > first resource (r0) works like a charm, r1 gets "PingAck did not
> > arrive in time" after 30min. maximum which results in a split-brain
> > situation.
> > 
> > I'm using DRBD 8.3.10 with kernel 2.6.32 on a debian squeeze using
> > proxmox for virtualization.
> > The connection between the two nodes is bonding device built out of
> > two Intel e1000 cards.
> > 
> > Here's the resource definition of my drbd.conf
> > 
> > resource r0 {
> >          protocol C;
> >          disk {
> >                  no-md-flushes;
> >                  no-disk-flushes;
> >                  no-disk-barrier;
> >          }
> >          on vm01 {
> >                  device /dev/drbd0;
> >                  disk /dev/sdb1;
> >                  address 10.254.1.101:7780;
> >                  meta-disk internal;
> >          }
> >          on vm02 {
> >                  device /dev/drbd0;
> >                  disk /dev/sdb1;
> >                  address 10.254.1.102:7780;
> >                  meta-disk internal;
> >          }
> > }
> > resource r1 {
> >          protocol C;
> >          disk {
> >                  no-md-flushes;
> >                  no-disk-flushes;
> >                  no-disk-barrier;
> >          }
> >          on vm01 {
> >                  device /dev/drbd1;
> >                  disk /dev/sdc2;
> >                  address 10.254.1.101:7781;
> >                  meta-disk internal;
> >          }
> >          on vm02 {
> >                  device /dev/drbd1;
> >                  disk /dev/sdc2;
> >                  address 10.254.1.102:7781;
> >                  meta-disk internal;
> >          }
> > }
> > 
> > 
> > any help anyone?
> > 
> > regards
> > Lukas
> > --
> > 
> > --------------------------
> > software security networks
> > Lukas Gradl <proxmox#ssn.at>
> > Eduard-Bodem-Gasse 6
> > A - 6020 Innsbruck
> > Tel: +43-512-214040-0
> > Fax: +43-512-214040-21
> > --------------------------
> > _______________________________________________
> > drbd-user mailing list
> > drbd-user at lists.linbit.com
> > http://lists.linbit.com/mailman/listinfo/drbd-user
> > 
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
> 



More information about the drbd-user mailing list