[DRBD-user] startup hang after "yes"

Jake Smith jsmith at argotec.com
Tue May 29 21:58:16 CEST 2012

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


----- Original Message -----
> From: "Dan Barker" <dbarker at visioncomm.net>
> To: "drbd List" <drbd-user at lists.linbit.com>
> Sent: Tuesday, May 29, 2012 8:22:23 AM
> Subject: Re: [DRBD-user] startup hang after "yes"
> 
> Machines are now in semi-production (manual start/stop for obvious
> reasons).
> 
> The issue still occurs. If I remove the replication cable and boot
> the
> secondary machine (with 4, up to date resources), the boot process
> hangs
> after I reply "yes" to the prompt. Reinserting the cable does allow
> the
> startup scripts to continue, with the error message "waitpid:
> Interrupted
> system call", but simply replying "yes" is supposed to do so, with no
> error.
> 
> I don't recall seeing this problem before, and I've been through
> about 4
> drbd release levels.
> 

Long shot but... might be something related to this bug cropping back up? (defining as interactive in the init script):

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613654

Jake

> Dan (the top poster)
> 
> -----Original Message-----
> From: drbd-user-bounces at lists.linbit.com
> [mailto:drbd-user-bounces at lists.linbit.com] On Behalf Of Dan Barker
> Sent: Saturday, May 26, 2012 1:23 PM
> To: drbd List
> Subject: [DRBD-user] startup hang after "yes"
> 
> I'm building a new drbd machine. I put 8.4.0 on a Debian 603 and all
> looks
> fine except ...
> 
> Since I'm testing, I don't have another node. I did create-md and
> then
> primary --force. At boot time, there is no peer, so I get the
> count-up to
> yes. When I enter yes, nothing happens.
> 
> If I ssh in and stop/start drbd, all is normal and my initialization
> scripts
> finally run (the ones after drbd).
> 
> What can I do to stop the hang?
> 
> Other possibly mitigating factors:
>  There is no Ethernet cable connected to the NIC for DRBD
>  synchronization.
>  There is only one drbd resource defined, drbd3 (no 0, 1 or 2).
> 
> I chose 8.4.0 to match the peer in the environment. I thought about
> 8.4.1 or
> 8.3.13, but I'll just update everybody to 9 soon.
> 
> Dan
> 
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
> 
> 



More information about the drbd-user mailing list