[DRBD-user] multiple DRBD + solid state drive + 10G Ethernet performance tuning. Help!!

wang xuchen ben.wxc at gmail.com
Fri Oct 29 18:09:29 CEST 2010


Hi all,

I have encountered a DRBD write performance bottleneck issue.

According to DRBD specification "DRBD then reduces that throughput maximum
by its additional throughput overhead, which can be expected to be less than
3 percent."

My current test environment is:

(1) Hard-drive:  300G SSD with 8 partitions on it, each of which has a DRBD
device create on top it. I use dd utility to test its performance: 97 MB/s
with 4k block size.


(2) netowork: dedicated 10G ethernet card for data replication:
ethtool eth2
Settings for eth2:
...
        Speed: 10000Mb/s
...

(3) DRBD configuration: (Here is one of them).

    on Server1 {
        device           /dev/drbd3 minor 3;
        disk             /dev/fioa3;
        address          ipv4 192.168.202.107:7793;
        meta-disk        internal;
    }
    on NSS_108 {
        device           /dev/drbd3 minor 3;
        disk             /dev/fioa3;
        address          ipv4 192.168.202.108:7793;
        meta-disk        internal;
    }
    net {
        allow-two-primaries;
        after-sb-0pri    discard-zero-changes;
        after-sb-1pri    consensus;
        after-sb-2pri    call-pri-lost-after-sb;
        rr-conflict      disconnect;
        max-buffers      4000;
        max-epoch-size   16000;
        unplug-watermark 4000;
        sndbuf-size       2M;
        data-integrity-alg crc32c;
    }
    syncer {
        rate             300M;
        csums-alg        md5;
        verify-alg       crc32c;
        al-extents       3800;
        cpu-mask           2;
    }
}

(4) Test result:

I have a simple script which use multiple instance of dd to their
corresponding DRBD device

dd if=/dev/zero of=/dev/drbd1 bs=4k count=10000 oflag=direct &
....

For one device, I got roughly 8M/s. As the test goes, I increase the number
of device to see if it helps the performance. Unfortunately, as the number
of device grows, performance seems to be distributed on each of the device
with the total add up to 10M/s.

Can somebody give me a hint on what was going wrong?

Many Thanks.
Ben


Commit yourself to constant self-improvement
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20101029/83927499/attachment.htm>


More information about the drbd-user mailing list