[DRBD-user] drbdadm verify speed

Ravi Kanth raveeknth at gmail.com
Tue Oct 19 20:35:09 CEST 2010


I am trying to use drbdadm verify resources and I can only get 60Mbps data
rate. I am using infiniband and my syncer rate is 500Mbps.

Is there any setting that I can change for the verification to happen at the
full bandwidth speed? I want to use the full bandwidth for verification.

Conf file
########

global {
usage-count no;
}
common { syncer { rate 500M; verify-alg  md5; } }
resource r7 {
protocol C;
handlers {
pri-on-incon-degr "echo '!DRBD! pri on incon-degr' | wall;
/etc/init.d/hearbeat stop ";
outdate-peer "/usr/lib/heartbeat/drbd-peer-outdater";
}
on ninja1 {
device /dev/drbd7;
disk /dev/loop0;
address 10.0.2.150:7788;
meta-disk internal;
}
on ninja2 {
device /dev/drbd7;
disk /dev/loop0;
address 10.0.2.151:7788;
meta-disk internal;
}

net {
allow-two-primaries;
sndbuf-size 512k;
timeout 60;
connect-int 10;
ping-int 10;
ping-timeout 5
ko-count 0;
max-epoch-size 8096;
}
}


Thanks
Ravee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20101019/419c8826/attachment.htm>


More information about the drbd-user mailing list