[DRBD-user] slightly different partition sizes

anil kumar anildahiya80 at gmail.com
Tue Dec 16 09:35:30 CET 2008

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


You can use resize2fs to resize your partition.

Regards,
Anil


On Tue, Dec 16, 2008 at 1:34 PM, Martin Winkler <mw at martinwinkler.com>wrote:

> Hi all,
>
> I have a relatively new drbd setup and just realized that there is a
> slight difference in size on the partitions I am using:
> node1: /dev/sda3 (/dev/drbd0): 232717558 blocks, ext3
>       /dev/sdb1 (/dev/drbd1): 232717590 blocks, ext3
>
> node2: /dev/sda3 (/dev/drbd1): 232717558 blocks, ext3
>       /dev/sdb1 (/dev/drbd0): 232717590 blocks, ext3
>
> The metadata is always on a different partition.
> After the sync DRBD did not raise any error as far as I can tell,
> and /proc/drbd says the drives are fully UpToDate.
>
> Now my question: Is this difference significant if drbd did not raise
> any errors? I am feeling a bit uncomfortable here. What should I do to
> make the same sizes in case there is a problem with my setup?
>
> Martin
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20081216/19f5249f/attachment.htm>


More information about the drbd-user mailing list