Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Am Freitag, den 05.05.2006, 15:53 -0400 schrieb Charles Riley:
> What does dmesg say? Or cat /proc/drbd?
dmesg says nothing..
cat /proc/drbd is ok:
version: 0.7.18 (api:78/proto:74)
SVN Revision: 2176 build by root at lbs4, 2006-05-05 16:11:57
0: cs:Connected st:Secondary/Primary ld:Consistent
ns:0 nr:198309176 dw:198309176 dr:0 al:0 bm:11909 lo:0 pe:0 ua:0
ap:0
1: cs:Connected st:Primary/Secondary ld:Consistent
ns:198358328 nr:0 dw:3195580 dr:195162840 al:2481 bm:12166 lo:0 pe:0
ua:0 ap:0
I have two resources, drbd0 is primary on node one, drbd1 is primary on
node two.
>
> Your drbddisk haresource line would help, too.
>
lbs3 10.0.0.41 10.0.0.51 drbddisk::drbd0
lbs4 10.0.0.42 10.0.0.52 drbddisk::drbd1
At the moment there are no programs which are started here, this will
follow later when all is running fine. The IP-addresses are assigned
correctly. (I have a similar configuration on two other machines with a
slightly older DRBD-version, there everything is running fine since
years.)
> What happens if you manually make the drbd device primary and mount it?
>
Making them primary via heartbeat or manually runs fine. fstab is ok:
/dev/drbd0 /data3 ext3 noauto 0 0
/dev/drbd1 /data4 ext3 noauto 0 0
Mounting manually runs fine.
mfg ar
--
E-Learning in der Schule:
http://www.dbg-metzingen.de/Menschen/Lehrer/Q-T/Rittershofer/E-Learning/