Hi Rasto,<br><br>First of all, thanks for adding the ability to edit the block device parameter when adding a Filesystem OCF RA!<br>Only when I click "Select..." to edit the field it is not cleared automatically (like the mount pount parameter below it) it would be nice that it behaves the same as the mount point field.<br>
<br>I have several problems (mostly cosmetic) with adding hosts to an existing cluster.<br><br>I tested this all with 0.9.1.dev.7<br><br>First problem, to reproduce:<br><br>1) Add a host (host1)<br><br>2) Add another host (host2)<br>
<br>3) Create cluster containing only host1<br><br>4) Connect to cluster<br><br>5) Click on Cluster wizard and add host2 to the cluster.<br><br>6) host2 is added to the config but the cluster is not updated, i HAVE to exit the DRBD-MC and restart it and reconnect to the cluster to see the whole cluster.<br>
Or is there another way to "refresh" the cluster?<br><br>Second problem, to reproduce:<br><br>1) Add a host (host1)<br>
<br>
2) Add another host (host2)<br>
<br>
3) Create cluster containing both host1 and host2<br><br>
4) Connect to cluster<br><br>5) Exit DRBD-MC<br><br>6) Start DRBD-MC<br><br>7) Select the cluster and click Remove marked clusters<br><br>8) host1 and host2 are still in the host list only the Cluster Wizard gets greyed out, so I cannot re-create a cluster with host1 and host2.<br>
Again you HAVE to exit DRBD-MC and start it again so the cluster wizard button is available again.<br clear="all"><br><br>Third problem is that when creating a cluster the input field of "Name:" is NOT editable (this only happens sometimes!)<br>
I'm using java on ubuntu 10.10:<br>$ java -version<br>java version "1.6.0_24"<br>Java(TM) SE Runtime Environment (build 1.6.0_24-b07)<br>Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode, sharing)<br><br>
<br>Fourth "problem" is that when creating a two node cluster the node icons (graphical view) are overlapping each other so I have to drag them away from each other. (I hope you get what I mean)<br><br>Lastly it would be nice to have a "Add host to cluster" button when selecting a cluster while having single host(s) (not belonging to a cluster) in the host list.<br>
<br>Kind regards,<br><br>Caspar Smit<br>Systemengineer<br>True Bit Resources B.V.<br>Ampèrestraat 13E<br>1446 TP Purmerend<br><br>T: +31(0)299 410 475<br>F: +31(0)299 410 476<br>@: <a href="mailto:c.smit@truebit.nl" target="_blank">c.smit@truebit.nl</a><br>
W: <a href="http://www.truebit.nl" target="_blank">www.truebit.nl</a><br><br>